DRT1211C & DRT1212C

The DRT1211C provides a compact, yet powerful, collection capability against Push-to-Talk (PTT) signals.

DRT1211C-Face-Right Enlarge View
DRT1211C-Face-Right
 
   

The DRT1211C provides a compact, yet powerful, collection capability against Push-to-Talk (PTT) signals.  The system is based on an industry-standard bus format, and uses the latest digital signal processing (DSP), RF, and microprocessor technology. The DRT1211C, a ruggedized system, provides the same functionality as the DRT1201C. The DRT1211C I/O connectors are located on the rear of the chassis adding 1U of height.  In addition, the modules are recessed behind a removable panel which contains an air filter. DRT1211C supports a full complement of third generation modules.

DRT1212C is a DC powered-version of the DRT1211C. It has the same features and accessories, but the DC power input replaces the AC power input. AC/DC adapter included.

  • Monitors up to 816 half-duplex channels (up to 48 channels per WPM3A). 
  • Software configurable.
  • DF option available.
  • Flexible tuner configuration provides frequency coverage of all bands of interest.
    • RFT3A-40 (Standard): Dual channel transceiver VHF/UHF coverage from 20 – 3000 MHz; HF from 0.5 – 32 MHz.
    • RFT4 (Optional): Dual channel transceiver VHF/UHF coverage from 20 – 6500 MHz; HF from 0.5 – 32 MHz.
    • HFT1B (Optional): High performance HF receiver from   0.2 – 32 MHz
  • FPGA based Wireless Processor (WPM3A) enables wideband signal processing. 
  • Auto-configuration mode facilitates setup of unit.
  • Timestamped wideband and narrowband data.
  • 1PPS Sync Signal Input/Output.
  • 10 MHz Reference Signal Input/Output.
  • Built-in GPS receiver.
  • Eighteen slots are available for any combination of tuners or WPM3As. A non-blocking switch routes the Digitized IF (DIF) Data from any slot to any other slot. Up to eight DIF channels into a WPM3A.
  • Supports target lists with up to 10,000 entries.
  • Small size and low power.
  • User-friendly Graphical User Interface (GUI).
  • Controlled from PC using Windows XP or Windows 7 via Ethernet interface.
  • 16 half-duplex conversations can be recorded on internal disk drive or streamed to other networked devices. E1 output optional. Stereo headphone output directly from receiver or headphone output can be streamed to a PC.
  • Integrated spectrum analysis tool.